Design and Implementation of Hybrid Fuzzy Control of a Magnetic Levitation System
Abstract
In this research paper scientific model of the levitation system based on the magnetic field has been implemented with the help of the fuzzy-logic controller. The behaviour of alluring (maglev) mainly based on the PID-controller being used. Therefore, a controller based on PID has been organized to control efficiently and get the desired performance of the maglev system under study. But, as evident from the literature review, a PID controller has its limitations and is typically undefined in the situation of changing the load because PID controllers have fixed constraints. Due to these limitations, a controller that is based on fuzzy logic has been designed to overcome these problems. By using the fuzzy logic, again has been selected for the PID-controller by using the different values of load and set the reference value to calculate the gain error. Best suited membership functions have been used to fuzzifier the gain parameters. An optimal inference engine has been designed to map inputs to the corresponding outputs. Finally, a de-fuzzifier has been designed to get crisp values which reflect the gain constraints of the designed PID Regulator. This fuzzy controller supervises the conventional PID controller to automatically adjust its parameters to control the maglev system even with varying load and varying air gap changes.
Copyright (c) 2020 Pakistan Journal of Engineering and Technology
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
COPYRIGHT POLICY
UOL journals follow an open-access publishing policy and full text of all articles is available free, immediately upon acceptance. Articles are published and distributed under the terms of the CC BY-SA 4.0 International License. Thus, work submitted to UOL Journals implies that it is original, unpublished work of the authors; neither published previously nor accepted/under consideration for publication elsewhere.
Authors will be responsible for any information written/informed/reported in the submitted manuscript. Although we do not require authors to submit the data collection documents and coded sheets used to do quantitative or qualitative analysis, we may request it at any time during the publication process, including after the article has been published. It is author's responsibility to obtain signed permission from the copyright holder to use and reproduce text, illustrations, tables, etc., published previously in other journals, electronic or print media.
Conflict of interest statements will be published at the end of the article. If no conflict of interest exists, the following sentence will be used: "The authors declare no conflict of interest." Authors are required to disclose any sponsorship or funding received from any institution relating to their research. The editor(s) will determine what disclosures, if any, should be available to the readers.
Authors are not permitted to post the work on any website/blog/forum/board or at any other place, by any means, from the time such work is submitted to UOL journals until the final decision on the paper has been given to them. In case a paper is accepted for publication, the authors may not post the work in its entirety on any website/blog/forum/board or at any other place, by any means, till the paper is published in UOL Journals.
The authors may, however, post the title, authors’ names and their affiliations and abstract, with the following statement on the first page of the paper - "The manuscript has been accepted for publication in UOL Journals". After publication of the article, it may be posted anywhere with full journal citation included.
All articles published in UOL journals are open-access articles, published and distributed under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License which permits remixing, transformation, or building upon the material, provided the original work is appropriately cited mentioning the authors and the publisher, as well as the produced work is distributed under the same license as the original.
In the future, UOL may reproduce printed copies of articles in any form. Without prejudice to the terms of the license given below, we retain the right to reproduce author's articles in this way.
Brief Summary Of The License Agreement
By submitting your research article(s) to UOL Journal(s), you agree to Creative Commons Attribution-ShareAlike 4.0 International License which states that:
Anyone is free:
o To copy and redistribute the material in any medium or format
o To remix, transform, or build upon the material for any purpose, even commercially
Provided:
o The author and the publisher have been appropriately credited
o The link to license is provided
o Indicated if any changes were made
o The material produced is distributed under the same license as the original